B) Noise, wood dust or volatile harmful gases Log Splitter shall be equipped with
muffler, vacuum or ventilation device connected with the mechanical operation to
eliminate or mitigate the occupational hazards and safeguard the workers' safety
C) Woodworking machines should have a safety coupling device between the
knife shaft and the electric appliance. When loading and unloading or
replacement of cutting tools and maintenance, it can cut off the power supply
and keep the disconnected position to prevent accidental contact with the power
switch or sudden power supply starting machinery.2) woodworking machinery safety
D) For the wood processing operations in the wood rebound risk, should be
used for safety feeding device or set the separation knife, anti-rebound safety
screen protection device.
E) In the installation of the normal start and stop control device, but also
specially set up in case of emergency shutdown of the safety control device.
Woodworking machinery: sports car band saw, light band saw, vertical saw
circular saw, cross saw, flat planer, pressure planer, wood milling machines,
wood grinding machines.
Woodworking machinery is characterized by high cutting speed. Knife shaft
speed generally have to reach 2500-4000 r / min. And sometimes even higher, and
thus rotating inertia, difficult to brake.
As the woodworking machinery to use more manual feeding, when the hand to
push the wood into the time, often due to bumps, bending or other defects caused
by hand and blade contact, causing injury or even cut off the fingers.
The operator is not familiar with the Performance
Built Log Splitter mechanical properties of woodworking and safe handling
techniques, or do not follow the safe operation of mechanical manipulation, is
another reason for the occurrence of injury accidents.